Combined use of coagulation (M. oleifera) and electrochemical techniques in the treatment of industrial paint wastewater for reuse and/or disposal.

In this work, water-based paint (WBP) wastewater was treated using a natural coagulant, Moringa oleifera aqueous extract (MOAE), fortified with Ca2+ (from nitrate and chloride salts). In order to improve the quality of the treated wastewater and render it suitable for disposal, an electrolytic flow process was associated with the wastewater treatment using a filter-press reactor with a boron doped diamond (BDD) electrode. The feasibility of the treatment was evidenced by the reuse of the treated wastewater in the production of a new paint (manufactured by the company supplying the raw wastewater), whose quality was compatible with the water used by the manufacturer. The best conditions for the coagulation-flocculation process involved the use of 80 mL of MOAE (50 g/L of MO and 0.125 mol/L of Ca2+) for every 1.0 L of wastewater at pH 6.5. The limiting current density (35 mA/cm2) and an electrolysis time of 90 min (charge passed of 3.68 A h/L) were used in the electrochemical treatment. Biotoxicity assays using the brine shrimp Artemia salina revealed that the mortality (in %) of microcrustaceans was reduced from 100% (raw wastewater) to only 11% at the end of the electrolysis process, in addition to eliminating the strong odor and 85% of the organic load. Moreover, microbiological tests showed that the number of mesophiles decreased by more than six orders of magnitude and there was no growth of thermotolerant coliforms (TC).

Treatment of paint manufacturing wastewater by coagulation/electrochemical methods: Proposals for disposal and/or reuse of treated water.

This paper describes and discusses an investigation into the treatment of paint manufacturing wastewater (water-based acrylic texture) by coagulation (aluminum sulfate) coupled to electrochemical methods (BDD electrode). Two proposals are put forward, based on the results. The first proposal considers the feasibility of reusing wastewater treated by the methods separately and in combination, while the second examines the possibility of its disposal into water bodies. To this end, parameters such as toxicity, turbidity, color, organic load, dissolved aluminum, alkalinity, hardness and odor are evaluated. In addition, the proposal for water reuse is strengthened by the quality of the water-based paints produced using the wastewater treated by the two methods (combined and separate), which was evaluated based on the typical parameters for the quality control of these products. Under optimized conditions, the use of the chemical coagulation (12 mL/L of Al2(SO4)3 dosage) treatment, alone, proved the feasibility of reusing the treated wastewater in the paint manufacturing process. However, the use of the electrochemical method (i = 10 mA/cm(2) and t = 90 min) was required to render the treated wastewater suitable for discharge into water bodies.